8:00 - 6:00

Mon - Sat

8281848484 / 9188323232

For Enquiry



Image

Our Flyline Product

Flyline Solar Panel

A PV(Photo Voltaic)module is an assembly of number of photovoltaic cells mounted in a frame work for installation.This cells use sunlight is a source of energy.A photovoltaic module or photovoltaic panel is a combination of packaged interconnected assembly of photovoltaic cells, also known as solar cells. These cells are made of two layers of semiconductor material. When light enters the cell, electrons are forced to flow between the layers to produce current. With the help of Solar energy a single photovoltaic module can produce a certain amount of wattage, installations intended to produce larger electrical power capacity require an installation of several modules or panels and this is known as a photovoltaic array. The Photovoltaic electric cell uses generate electrical energy when the surface of the cell is exposed to electromagnetic radiation. In kerala climate 1000 W solar panels can create between 4 Kwh to 4.5 Kwh electricity per day. here are three types of solar panels poly-crystalline, mono-crystalline and mono PERC Solar cells. They are made-up of silicon. The main difference is that the poly-crystalline material is made up of millions or billions of small silicon crystals, but Mono-crystalline material is made up of one large single crystal of silicon.

The major quality difference is mono-crystalline solar panel is more efficient at converting photons to electrons for electricity while the poly-silicon is less efficient because electrons are captured or generated less efficiently where the crystals of silicon touch.Poly-crystalline panels are commonly used because the manufacture cost is less and so we get these panels in competitive price. Mono PERC solar cells have an additional layer with the back side of the cell. This layer allows some of the sun’s rays to reflect back into the solar cell, gives them an opportunity to be turned into energy. So that , this cells produce huge amount of energy than conventional cells.Mono crystalline solar cells can create current at cloudy condition and even when it is raining Murickens group market these high quality ISO certified solar panels in whole sale and retail price in kerala. We are using 5 busbar (5BB) cells

TYPES OF SOLAR CELLS

1. Flyline Monocrystalline cells :-

Most mono crystalline are silicon wafer which cut in thin slices from most pure silicon cylinder and micro circuits are fabricated on it single crystal silicon. Advantage of mono crystalline - is most efficient and most dependable way to produce electricity from the sun. Comparing to polycrystalline mono is 20 to 30% more efficient, because each module is made from a single silicon crystal and is more efficient than polycrystalline. The silicon crystal used in single cells must be requires a much higher purity level. Mono-crystalline solar panels are first generation solar technology and have long time durability. It produces more electricity per square meter. In Kerala climate 1000 W Solar panels can create between 4.5 Kwh to 5 Kwh electricity per day.

2. Flyline Polycrystalline cells :-

The cost of production of polycrystalline is less than that of mono-crystalline, is very commonly used. Polycrystalline cells are constructed by the method of molten silicon is poured into a cast instead of being made into a single crystal. This material can be synthesized easily by allowing liquid silicon to cool using a seed crystal of the desired crystal structure. High temperature chemical vapor deposition (CVD), is the other methods for crystallizing amorphous silicon to form poly silicon. In this process, silicon pieces are melted in a ceramic crucible and then formed in a graphite mold to form a block of silicon. As the molten silicon is cooling a seed crystal of the desired crystal structure is created for formation. For this process only less silicon is required and thus manufacturing cost is reduced and that is why the efficiency is poor than Monocrystalline. Polycrystalline panels only have an efficiency of 70% to 80% compared with mono-crystalline solar panel.We are using 5 busbar (5BB) cells.

3. Flyline Thin film solar panel :-

These are most advanced flexible model solar panels. We can install it in any curved or plane surface where sunlight is available. Thin film solar panel is more efficient comparing Poly and mono crystalline cells but the main drawback is lifetime is only half time than Poly and mono Crystalline cells.

4. Mono PERC Solar Cells :-

Mono PERC "Passivated Emitter and Rear Contact" solar cells - This type of solar cells are used for the production of solar panels. PERC cells are the modified form of conventional cells. PERC solar cells have an additional layer with the back side of the cell. This layer allows some of the sun’s rays to reflect back into the solar cell, gives them an opportunity to be turned into energy. So that , this cells produce huge amount of energy compared to conventional cells.

Solar Cell Features :

Different wattage panel is available like 25W, 50W, 100W, 125W, 275W, 315W, 335W, 345W, 390W, 420W and 540W

SOLAR PANEL TECHNICAL SPECIFICATION

1. CELL TYPE - MONO CRYSTALLINE /MONO PERC

Cell Type - Mono Crystalline /Mono Perc
Nominal Max. Power (Pmax)
315 W 390 W 420 W 540 W
Opt OperatingVoltage (Vmp)
38.15 V 40.74 V 44.9 V 50.5 V
Opt. Operating Current (Imp)
8.2 A 9.2 A 9.37 A 12.37 A
Open Circuit Voltage (Voc)
33.40 V 49.87 V 53.8 V 69.17V
Short Circuit Current (Isc)
9.70 A 9.75 A 9.80 A 12.57A
Module Efficiency
18.38% 19.64% 20.37% 21%
Max. Series Fuse Rating
15 A 15 A 15 A 15 A
Application Classification
Class A Class A Class A Class A
module weight
22 Kg 22 Kg 22 Kg
32.4Kg
Power Tolerance
0 ~ + 5 W 0 ~ + 5 W 0 ~ + 10 W 0 - + 10 W
M.Size 1600x995mm 1988x1005mm 2078x992mm 2266x1135mm
Max. System Voltage 1500V (IEC) or 1000V (IEC
Operating Temperature 40°C ~ +85°C
Module Fire Performance CLASS C (IEC 61730)




2. POLY/MULTI CRYSTALLINE

Cell Type - Poly /Multi Crystalline
Nominal Max. Power (Pmax)
275 W 335 W 345 W
Opt. Operating Voltage (Vmp) 35 V 37.90 V 38.21 V
Opt. Operating Current (Imp) 8.2 A 08.85 A 09.07 A
Open Circuit Voltage (Voc) 40 V 46.27 V 46.33 V
Short Circuit Current (Isc) 9.5 A 09.41 A 9.68 A
Module Efficiency 18.38% 18.38% 19.5%
Max. Series Fuse Rating 15 A 15 A 15 A
Application Classification Class A Class A Class A
M.size 1600x995mm 1663x987mm 1985x1000mm
module weight 18.2Kg 18.2Kg 21.8Kg
Power Tolerance 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 5 W
Max. System Voltage 1500V (IEC) or 1000V (IEC)
Operating Temperature 40°C ~ +85°C
Module Fire Performance CLASS C (IEC 61730)




3. CELL TYPE - POLY / MULTI CRYSTALLINE 12V

Cell Type - Poly /Multi Crystalline 12V
Nominal Max. Power (Pmax)
25 W 50 W 75W 100 W 125 W
Opt. Operating Voltage (Vmp) 17.8 17.9 17.9 17.49 V 22.40 V
Opt. Operating Current (Imp) 1.124 A 2.84 A 4.31 A 5.94 A 7.40 A
Open Circuit Voltage (Voc) 21.4 V 21.4 V 21.4 V 21.46 V 23.8 V
Short Circuit Current (Isc) 1.305 A 3.28 A 4.76 A 6.39 A 6.45 A
Module Efficiency 17% 18.8% 19% 19% 19%
Max. System Voltage 1000V (EU) 1000V (EU) 1000V (EU) 1000V (EU) 1000V (EU)
Max. Series Fuse Rating 10.A 10.A 10.A 10.A 10.A
module weight 1.05 KG 3 KG 6 KG 7 KG 8 KG
Operating Temperature 40°C ~ +85°C
Power Tolerance 0 ~ + 3 W




Flyline Solar Panel Dimensions : Click Here

Flyline Solar Panel Installation Image : Click Here

Flyline Solar System Installation Videos : Click Here

Product Short Informative Videos:- Click here

Product Detailed Informative Videos:- Click here

Useful technical informative videos:- Click here

      

Watts of some electronic products we use : Click Here

Flyline Solar power plant installation video of MG Marketing System : Click Here

Some of our GOVT clients list : Click Now

        

Murickes Brouchure : Click Here

ENQUIRY

Quick Call : 09447366779, 09446822522 ,08281848484

Icon

Qualified Team

Icon

Individual Approach

Icon

100% Success

Icon

100% Satisfaction